HyperX 支援中心
知識庫文章
知識庫文章
SoloCast 2 Pro can be used with a Microphone stand or arm with either 3/8" or 5/8" threads.
Knowledge Base Article
•
SoloCast 2 Pro
Connect headphones to the 3.5mm headphone jack on the microphone for microphone monitoring and playback audio.
Knowledge Base Article
•
SoloCast 2 Pro
輕觸麥克風頂部即可靜音/取消靜音。麥克風狀態指示燈會顯示目前的靜音狀態。 LED指示燈亮起 - 靜音關閉 LED指示燈關閉 - 靜音
Knowledge Base Article
•
SoloCast 2
A. 輕觸靜音感應器 B. 麥克風狀態指示燈 C. 麥克風底座 D. 傾斜調整 E. USB-C 連接埠 F. 直立式安裝 G. USB-C 連接線
Knowledge Base Article
•
SoloCast 2
Plug the provided USB-C to USB-A cable into the microphone and PC or console
Knowledge Base Article
•
SoloCast 2 Pro
Tap the top of the microphone on the mute icon. The microphone status LED will indicate the current mute status. Mute On - Red Mute Off - Lighting Effect
Knowledge Base Article
•
SoloCast 2 Pro
Red - Mute Status Purple - Microphone Gain Level Yellow - Headphone Volume Level Cyan - Monitor/Playback Mix Level
Knowledge Base Article
•
SoloCast 2 Pro
A. Tap-To-Mute Sensor B. RGB LED Ring C. Tilt Adjustment D. 3.5mm Headphone Jack E. USB-C Port F. Mounting Threads G. USB-C to USB-A Cable
Knowledge Base Article
•
SoloCast 2 Pro
The HyperX SoloCast 2 Pro is a side-address microphone with cardioid pickup pattern that is most sensitive at the front to help reduce backgound noise. SoloCast 2 Pro should be positioned with the front HyperX (HX) logo facing the sound source for optimal performance. SoloCast 2 Pro can be tilted up
Knowledge Base Article
•
SoloCast 2 Pro