HyperX Support Center
Knowledge Base Articles
Knowledge Base Articles
The Cloud Orbit software is only compatible with Windows OS.
Knowledge Base Article
•
Cloud Orbit
There are several reasons the Orbit headset battery might not be charging while connected with the USB cable: The USB port the headset is plugged into may not be supplying enough power. This may happen if you are using a USB hub or laptop USB port Some USB ports do not supply power when in a power s
Knowledge Base Article
•
Cloud Orbit
Nintendo Switch USB Setup 1. Power on the headset. 2. Hold down the microphone volume wheel for 2 seconds to change audio modes. Repeat this step until the headset plays the voice prompt “2 Channel”. 3. Connect the headset to the Nintendo Switch dock via the USB Type-C to Type-A cable. 4. Hold the H
Knowledge Base Article
•
Cloud Orbit
It is not recommended to use an amp with the Orbit headset because the standard line level voltage must not be exceeded. If the amp outputs more than the line level, the headset may experience distortion or damage.
Knowledge Base Article
•
Cloud Orbit
EQ Presets Short press and scroll the microphone volume wheel up or down to change the EQ preset. A voice prompt will tell you which EQ preset the headset is using. Default - Tuned to the Audeze House curve. Foot Steps - Enhances sounds of footsteps. Ballistics - Enhances gunshots and other ballisti
Knowledge Base Article
•
Cloud Orbit
Cloud Orbit Software User Manual
Knowledge Base Article
•
Cloud Orbit
Power Button Hold down for 3 seconds > Power on headset Hold down for 5 seconds > Power off headset Press once > Play/pause audio Microphone Mute Move switch up > Disable microphone mute Move switch down > Enable microphone mute Microphone volume wheel Scroll > Adjust microphone volume level Short p
Knowledge Base Article
•
Cloud Orbit
A. Microphone mute B. Status LED C. Power button D. 3D button E. Microphone port F. USB Type-C port G. 3.5mm port H. Microphone volume wheel I. Headphone volume wheel J. Detachable boom microphone K. USB Type-C to USB Type-A cable L. USB Type-C to USB Type-C cab M. 3.5mm cable (4 pole)
Knowledge Base Article
•
Cloud Orbit
Charging the Headset When the charging cable is connected the LED will indicate the status. Status LED LED solid red > Charging LED off > Fully charged “Battery low” voice prompt plays at 15% battery. To disable USB charging, hold down the headphone volume wheel for 2 seconds.
Knowledge Base Article
•
Cloud Orbit