Headset

Articles - Category Page

  • Cloud Alpha Wireless Drivers

    The Cloud Alpha Wireless comes with dynamic, 50mm with neodymium magnets.

    Knowledge Base Article

  • CloudX In-Line Audio Control Operation

    In-line audio control operation The in-line audio control contains a volume wheel to adjust the headphone output volume and a microphone mute slider to mute the microphone. To increase the headset volume rotate the volume wheel clockwise (towards the + sign). To reduce the volume, rotate the volume

    Knowledge Base Article

  • Cloud MIX Charging and Status LED

    Headset charging When the headset is connected to a charger with the USB charge cable, the status LED will indicate the charge status. The headset will take approximately 3 hours to charge fully. Status LED indicators The status LED on the headset indicates the current state of the headset.

    Knowledge Base Article

  • Cloud Alpha 2 Wireless - Battery Replacement

    Power OFF the headset. Carefully pull the right ear cushion from the headset. Unscrew the 4x Phillips screws to separate the driver cover from the right earcup. Gently separate the cover from the earcup to avoid any damage. Locate and remove the battery secured with a connector. Place new battery ma

    Knowledge Base Article

  • My Orbit S headset is imbalanced in 3D mode

    If you notice that the audio is not balanced when using the 3D mode on the Orbit S headset, it may need to be centered. Look at the center of your screen and press the 3D button to mark as the focal point for audio. You will notice that moving your head position does not change the point of referenc

    Knowledge Base Article

  • CloudX Flight 2 Quick Start Guide

    CloudX Flight 2 Quick Start Guide

    Knowledge Base Article

  • Cloud Alpha Wireless Specifications

    Cloud Alpha Wireless Specifications Headphone Driver: Dynamic, 50mm with neodymium magnets Form factor: Over ear, circumaural, closed back Frequency response: 15 Hz – 21 kHz Impedance: 62 Ω Sensitivity: 103 dBSPL/mW at 1 kHz T.H.D.: ≤ 2% Frame type: Aluminum Ear cushions: Memory foam and premium lea

    Knowledge Base Article

  • Cloud Alpha Wireless Playstation 5 Setup

    1. Connect the wireless USB adapter to the PlayStation 5 console. 2. Go to the home page and select Settings > Sound 3. Under Microphone set the following: Input Device to USB Headset (HyperX Cloud Alpha Wireless) 4. Under Audio Output set the following: Output Device: USB Headset (HyperX Cloud Alph

    Knowledge Base Article

  • Cloud Alpha S Bass Adjustment

    Cloud Alpha S Bass Adjustment Move the bass adjustment sliders up or down to change the amount of bass in the headset. Move the sliders up for more bass. Move the sliders down for less bass.

    Knowledge Base Article

  • Cloud Mini Wireless Using with Xbox or PlayStation or Nintendo Switch

    Cloud Mini Wireless Using with Xbox or PlayStation or Nintendo Switch ​

    Knowledge Base Article