Pulsefire Haste 2 Series

Pulsefire Haste 2 Core Wireless DPI Presets There are 4 default DPI presets: 400 DPI (red) | 800 DPI (blue) | 1600 DPI (yellow) | 3200 DPI (green). Max DPI: Up to 12000 DPI.

The HyperX 26K sensor is our custom variant to the PixArt PAW3395.

1. Turn Off the Mouse. Switch power mode to "OFF". 2. Remove the PTFE Skates with a flat, plastic tool (e.g. spudger, fingernails) to reveal the 4x Torx 6 Security Screws below the feet. 3. Gently separate and lift the top shell from the bottom shell, in an upward motion 4. Locate and remove the bat

This specific process will only work if the mouse and the OMEN Laptop have never paired with each other. Additionally, the firmware of the mouse must be version 1121 or higher. Move the mouse close to the compatible OMEN Laptop, within 20cm or less. The module the mouse needs to pair with is located

There are 4 default DPI presets. 400 DPI (red) 800 DPI (blue) 1600 DPI (yellow) 3200 DPI (green) Max DPI Supported: Up to 26000 DPI.

The Pulsefire Haste 2 Pro has one onboard memory profile for storing a configuration from NGENUITY. Saved settings will remain in memory until either: Being overwritten within NGENUITY -> [Save to Mouse]. A factory reset is performed. On-board mouse settings will carry over onto any system the mouse

Grip Tape Pulsefire Haste 2 includes grip tape, which can be used for added control and comfort if desired. Attach the button grip tape for the left [1] and right [2] mouse buttons, with the pointed end facing the forward direction of the mouse. Attach the side grip tape for the left [3] and right [

A. Left click button B. Right click button C. Mouse wheel D. DPI button E. Forward button F. Back button G. USB-C port H. Premium glass skates I. HyperX 26K Sensor J. Power mode switch K. USB wireless dongle storage L. Grip tape M. Extra mouse skates N. USB wireless dongle O. Extension adapter P. US

Press and hold the DPI button + Mouse wheel button simultaneously until the mouse LED flashes red ​ Factory Settings DPI Level: 400 / 800 / 1600 / 3200 Polling rate: 1000Hz RGB lighting: Cycle effect Button Assignments

Mouse Specifications Shape Symmetrical Sensor - HyperX 26K Sensor Resolution - Up to 26000 DPI DPI Presets - 400 / 800 / 1600 / 3200 DPI Speed - 650 IPS Acceleration - 50G Buttons - 6 Left / Right Button - Switches HyperX Switch Left / Right Button - Durability 100 million clicks Light Effects Per-L