Cloud Family

Connect the USB wireless dongle to your device. Set headset mode switch to the WiFi icon. Power on the headset. To ensure the headset is configured correctly on the PS5, follow the steps below: Go to the home page and select Settings > Sound. Under Microphone, set the following: Input Device: USB He

Mic Mute Button Press the button to turn the mic mute on/off • LED On: Mic muted • LED Off: Mic active Volume Wheel Scroll up or down to adjust the volume level. WARNING: Permanent hearing damage can occur if a headset is used at high volumes for extended periods.

HyperX Cloud III S Wireless User Manual

The Cloud Core Wireless DTS is not compatible with NGENUITY. Any software interaction with the headset will be done through DTS® Sound Unbound®. Please follow the instructions on the included DTS instruction card to enable DTS Headphone:X ®. Please note there is no code to enter for this product; th

Status LED ​

헤드셋과 USB 동글을 다시 페어링해야 할 수도 있습니다. ​ 아래 단계를 따라 두 제품을 짝지어 주세요. 1. 헤드셋 전원이 꺼진 상태에서 헤드셋 상태 LED가 빨간색/녹색으로 빠르게 깜빡일 때까지 전원 버튼을 길게 누르십시오. 이제 헤드셋이 페어링 모드에 진입했습니다. 2. USB 어댑터가 연결된 상태에서 작은 도구(예: 클립, SIM 트레이 분리 도구 등)를 사용하여 USB 동글의 핀홀 안쪽에 있는 버튼을 동글의 LED가 빠르게 깜빡일 때까지 누르고 계십시오. 이제 USB 동글이 페어링 모드에 진입했습니다. 3. 헤드셋을 동글

Usage (Direct Connect) Connect your headset directly to your computer (or other devices) that have both a headset jack and a microphone jack. The headset jack, which has green stripes, plugs into the port signified by a green input or earphones symbol, and the microphone jack, which has pink stripes

Usage with Mobile Device (Phone or Tablet) To use the HyperX Cloud II headset with a mobile device, unplug the USB control box and plug the 3.5mm headset jack directly into the audio jack on your phone or tablet.

헤드셋 충전 중 헤드셋을 처음 사용하기 전에 완전히 충전하는 것이 좋습니다. 헤드셋을 충전할 때 헤드셋 상태 LED는 현재 충전 상태를 표시합니다. 유선 충전 유선으로 헤드셋을 충전하려면 USB 충전 케이블을 사용하여 헤드셋을 USB 포트에 연결하십시오.

Connect the USB wireless dongle to your device. Set headset mode switch to the WiFi icon. Power on the headset. To ensure the headset is configured correctly on the PC, follow the steps below. Right-click on the sound icon in the system tray and select Sound Settings. Set the output device to Speake