Pulsefire Haste 2 Pro

The default polling rate is 1k polling rate. Enable 4k Wireless Polling Rate 1. Power off the mouse completely. 2. Press and hold the DPI button. 3. While holding the DPI button, switch the mouse to 2.4G mode. The wheel LED will fast-blink green four times. To revert to the default 1k polling rate,

What's the difference of battery life when using 1000Hz and 4000Hz Polling Rate? 1000Hz: Up to 90 Hours 4000Hz: Up to 30 Hours This was tested continuously while turning off all the lighting and paired wirelessly. Your experience will vary based on your usage!

Does the Haste 2 Pro support NVIDIA Reflex? Currently, NVIDIA Reflex supports only the 1000Hz polling rate in 2.4G mode.

What is the mouse skate material? PTFE (Polytetrafluoroethylene).

The HyperX 26K sensor is our custom variant to the PixArt PAW3395.

It is recommended to charge your mouse fully before your first use. Connect the mouse to a PC or game console using the USB cable. USB data connectivity will override the selected power mode, forcing the mouse into a wired configuration. The mouse is charged via USB-C, located at the top of the mous

A. Left Click Button B. Right Click Button C. Mouse Wheel D. DPI Button E. Forward Button F. Back Button G. Magnetic Battery Cover H. HyperX 26k Sensor I. Power Mode Switch J. USB Wireless Dongle Storage K. Grip Tape L. Mouse Skates M. USB 4K Wireless Dongle N. Extension Adapter O. USB Charge/Data C

1. Switch the power mode to "OFF". 2. Remove the PTFE Skates with a flat, plastic tool (e.g. spudger, fingernails) to reveal the 4x Torx 6 Security Screws below the feet. 3. Gently separate and lift the top shell from the bottom shell in an upward motion. 4. Locate and remove the battery secured wit