Mikrofon

150Hz High-Pass filter: On- Green ​ Switching on the high-pass filter reduces out rumble or other unwanted low frequencies. The high-pass filter has a cutoff frequency of 150Hz and a roll-off of 12dB/octave. Presence Boost: On - Green ​ Switching on the presence boost enhances upper-mid frequencies,

QuadCast 2 S should be placed with the front of the microphone facing the sound source. The side with HyperX logo is the front side. ​

A. Tap-To-Mute Sensor B. RGB LED Ring C. Tilt Adjustment D. 3.5mm Headphone Jack E. USB-C Port F. Mounting Threads G. USB-C to USB-A Cable

Press the multifunction button to cycle between adjustment modes, shown by the [microphone] and [headset] LED's. The multifunction control's LED ring will indicate the setting of the currently selected mode. ​

Hold the volume knob down for 2 seconds to change the polar pattern

Przegląd SoloCast A. Czujnik wyciszenia od góry B. Dioda LED stanu mikrofonu C. Przewodnik po ustawieniach mikrofonu D. Statyw mikrofonowy E. Port USB-C F. Kabel USB

Quadcast Microphone Specifications Microphone Power consumption: 5V 125mA ample/bit rate: 48kHz/16-bit Element: Electret condenser microphone Condenser type: Three 14mm condensers Polar patterns: Stereo, Omnidirectional, Cardioid, Bidirectional Frequency response: 20Hz - 20kHz Sensitivity: -36dB (1V

Aby uzyskać optymalną wydajność, SoloCast 2 należy ustawić tak, aby logo HyperX (HX) było skierowane w stronę źródła dźwięku. SoloCast 2 można przechylić o 40 stopni, aby umożliwić łatwą regulację

Selecting a Polar Pattern ​ Rotate the polar pattern knob to select one of the four polar patterns. ​ Adjusting Gain Control ​ Rotate the gain control knob to adjust the gain of the microphone. Muting the Microphone ​ Tap the top of the microphone to mute/unmute the microphone. The microphone LED wi

The microphone mount adapter is included with the packaging of our Quadcast/Quadcast S microphones. It does not come attached to the unit, please check the box and all packing materials for the adapter piece.