Cloud Flight Family

Manually Pairing Headset and Wireless Adapter The headset and wireless adapter are already paired together for first-time use. If manual pairing is necessary, follow the steps below to pair the headset and wireless adapter together. 1. Make sure the headset is powered off. 2. Plug the USB wireless a

Right-click on the sound icon in the system tray and select Sound Settings. Set the output device to Headphones (HyperX Cloud Flight 2 Wireless). Set the input device to Microphone (HyperX Cloud Flight 2 Wireless).

Go to the home page and select Settings > Sound. For the microphone, set the Input Device to USB Headset "HyperX Cloud Flight 2 Wireless". For audio output, set the Output Device to USB Headset "HyperX Cloud Flight 2 Wireless". Additionally, set Output to Headphones to "All Audio".

Mic mute toggle: Press button to turn the mic mute on / off. Mic monitoring toggle: Hold button for 2 seconds to toggle mic monitoring on / off.

Setting up with PC 1. Connect the wireless USB adapter to the PC. 2. Power on the headset. 3. Right-click speaker icon > Select Open Sound settings > Select Sound Control Panel 4. Under the Playback tab, click on “HyperX Cloud Flight S Chat”. Then click on the down arrow next to Set Default and sele

Setting up with Discord 1. In Discord settings, select Voice & Video. 2. Under Voice Settings, set Input Device to “Microphone (HyperX Cloud Flight S Chat)”. 3. Set Output Device to “Headset Earphone (HyperX Cloud Flight S Chat)”.

Specifications Headphone Driver: Dynamic, 50mm with neodymium magnets Type: Circumaural, Closed back Frequency response: 20Hz–20,000Hz Impedance: 32 Ω Sound pressure level: 113dBSPL/mW at 1kHz T.H.D.: < 2% Weight: 288g Weight with mic: 298g Cable length and type: USB charge cable (1m) Microphone Ele

Cloud Flight S Quick Start Guide

Press both the power and multifunction buttons to toggle RGB LEDs on / off.* *Software required to customize RGB colors and lighting effects.

Slide the mode switch to Bluetooth. Press and hold both the power button and the multifunction button for 2 seconds. Pairing mode is active when the LED blinks blue and the voice prompt says, "Bluetooth pairing". Go to your device's Bluetooth settings and connect to "HyperX Cloud Flight 2 Wireless".