Cloud III Series

Cloud III Wireless User Manual

​ A. Mic mute button B. Microphone port C. Volume Wheel D. Detachable Microphone E. Microphone Mute LED F. USB Dongle G. USB-C to USB-A Adapter

Performing a factory reset on the headset will reset the headset to default settings, remove pairing info with paired Bluetooth devices, and remove pairing info with OMEN Instant Pair. Press and hold the Power button and Multi-function button for 10 seconds to initiate factory reset. The power statu

Setting up with PC Right-click the speaker icon > Select Open Sound settings > Select Sound control panel. Playback Device Set the Default Device to “HyperX Cloud III Wireless” Recording Device Set the Default Device to “HyperX Cloud III Wireless”

A. Mic mute/mic monitoring button B. Status LED C. Power button D. USB-C charge port E. Microphone port F. Volume wheel G. Detachable microphone H. Microphone mute LED I. USB wireless dongle J. Dongle status LED K. Pairing pin hole L. USB-C to USB-A adapter M. USB charge cable

Usage ​ Please note, all Cloud III Wireless settings configured within NGENUITY on PC (other than the auto-power-off setting) are saved software-side. They will not carry over when using the headset on another platform eg. console.

Locate the Wireless Module. Open the OMEN laptop screen. Identify the wireless receiver module located on the top right corner of the screen bezel. Set the Headset to Adapter Mode. Slide the connection mode switch on the headset to WiFi mode. With the headset in Adapter mode, hold down the power but

*This method is only possible if the OMEN laptop has already previously paired with a compatible Instant Pair headset. Open the NGENUITY software. Go to the Settings tab. Under “Connected Hardware,” select HyperX Wireless Embedded Receiver. Click Pair new headset to set the OMEN system in pairing mo

Connect the USB wireless dongle to your device. Set headset mode switch to the WiFi icon. Power on the headset. To ensure the headset is configured correctly on the PS5, follow the steps below: Go to the home page and select Settings > Sound. Under Microphone, set the following: Input Device: USB He

Mic Mute Button Press the button to turn the mic mute on/off • LED On: Mic muted • LED Off: Mic active Volume Wheel Scroll up or down to adjust the volume level. WARNING: Permanent hearing damage can occur if a headset is used at high volumes for extended periods.