Cloud III Series

Status LED ​

HyperX Cloud III S Wireless User Manual

Connect the USB wireless dongle to your device. Set headset mode switch to the WiFi icon. Power on the headset. To ensure the headset is configured correctly on the PC, follow the steps below. Right-click on the sound icon in the system tray and select Sound Settings. Set the output device to Speake

Instant Pair should be possible as long as the OMEN laptop is “Connection Ready” in NGENUITY settings and the headset has not been previously paired with another OMEN laptop. If either the OMEN laptop or the headset has been paired already, both the laptop and the headset need the Instant Pair pairi

In NGENUITY software, nagivate to the Settings tab. Under "Connected Hardware", find "HyperX Internal Wireless Audio Adapter" and click on "Initiate Pairing Mode". Click on the "Start Pairing" button. The laptop is now in pairing mode. While the headset is powered off, hold down the power button unt

Power off the headset. Carefully pull the right ear cushion from the headset. Unscrew the 4x Phillips screws to separate the driver cover from the right earcup. Gently separate the cover from the earcup to avoid any damage. Locate and remove the battery secured with the connector. Place new battery

Double press the power button to switch between OMEN gaming laptop connection and USB wireless dongle connection.

​​ Please note that no Cloud III wired settings configured within NGENUITY are saved onto the headset (USB). They will not persist when used with another system.

HP and its HyperX brand maintain strict standards for materials selection and product testing. Our products undergo comprehensive evaluation, validated by accredited, independent third-party laboratories to confirm compliance with established global regulatory requirements for electronic devices. We

简而言之：如果您的无线网卡在 PS5 或其他系统上无法工作，但在其他设备上却可以正常工作，请使用外接电源的 USB 集线器。必须是外接电源的集线器。如果仍然遇到问题，请联系我们。 护理团队。 如果您有一款无线产品（特别是耳机），它通过无线 USB 适配器连接，并且您尝试将其与 PS5 一起使用，您可能会遇到 PS5 似乎无法识别 USB 的问题。 将USB适配器插入PS5后，适配器上的LED指示灯应该亮起。如果指示灯不亮，则表明适配器无法正常工作。 然而，这可能并非加密狗本身的问题。主机端最近对USB接口的改动可能导致USB接口供电过高，进而导致USB加密狗进入安全模式。部分主机型号仅在前置U