Cloud Flight Family

Read all instructions below, before attempting to replace the battery. Power OFF the headset. Carefully pull the right ear cushion from the headset. Note how it's slotted into the earcup. Unscrew the 4x Phillips screws to separate the driver cover from the right earcup. Gently separate the cover fro

Cloud Flight 2 QSG

Connecting the CloudX Flight 2 via Bluetooth Slide the wireless mode switch to Bluetooth mode. The headset will enter Bluetooth pairing on the first setup. Go to your device Bluetooth settings, search, and connect to “HyperX CloudX Flight 2 Wireless”.

CloudX Flight 2 Quick Start Guide

Power on / off: Hold button for 2 seconds to power headset on / off. Battery level status: Press button to check the battery level. The status LED will automatically turn off to conserve battery life. Battery Level Headset Status LED 61% to 100% Solid-fade Green 21% to 60% Solid-fade Yellow 10% to 2

​ Power Status Beep Tone Indicator Power on One tone (high) Power off Two tones (high, low) Volume Status Beep Tone Indicator Setting to 100% maximum volume Three tones (high) Setting to 0% minimum volume Three tones (low) Microphone Mute Status Beep Tone Indicator Microphone muted Two tones (high)

Manually Pairing the Headset and USB Adapter While the headset is powered off, hold down the power button until the headset earcup LEDs starts blinking rapidly. The headset is now in pairing mode. While the USB adapter is plugged in, use a small tool (e.g. paper clip, SIM tray ejector, etc.) to hold

Go to hyperx.com/ngenuity to download the NGENUITY software. NGENUITY software features include: RGB Lighting customization. Adjustable auto-shut-off behavior. Battery level indicator. *Note: Support may vary between NGENUITY and NGENUITY beta. Use NGENUITY for: Instant Pair functionality Basic audi

Using Xbox One® 1. Connect the wireless adapter to a USB port on the Xbox One® system. 2. Power on the headset. 3. When the wireless adapter status light is solid, the headset is now connected to the adapter. 4. If logged in with an account, the Xbox One® will assign the headset to that account and

It is recommended to fully charge your headset before first use. ​ Charge Status Status LED Fully Charged Solid Green 61% - 99% Breathing Green 21% - 60% Breathing Yellow < 20% Breathing Red