Cloud MIX Family

Cloud MIX Specifications Headphone Driver: Custom dynamic, 40mm with neodymium magnets Type: Circumaural, closed-back Frequency response: 10Hz–40,000Hz Impedance: 40 Ω Sound pressure level: 100dBSPL/mW at 1kHz THD: < 2% Weight: 260g Weight with mic: 275g Cable length: Detachable headset cable: 1.3m

Wired headset setup 1. Connect the detachable microphone to the headset’s microphone port. Push until the microphone sits flush. 2. Connect the 3.5mm cable plug with the grey portion into the headset’s cable port. Push until you feel a click and there is no visible grey portion. 3. Connect the oppos

Cloud MIX 2 Connection Modes Dual Mode (default): The headset can connect to a 2.4GHz Ultra-Low Latency USB dongle and Bluetooth device. In this Mode, the headset prioritizes the USB dongle connection and automatically switches to Bluetooth for communication if the dongle connection becomes unavaila

In-line controller Rotate the volume wheel to increase/decrease the volume. Slide the microphone mute switch up or down to mute/unmute the microphone. The red mark on the switch indicates that the mic is muted

Cloud MIX 2 Manually Pairing USB Adapter 1. Plug the USB Adapter into a support device. 2. Make sure headset is powered off, then press and hold the [Power] button for 10 seconds. The headset status LED will begin flashing white quickly. 3. Press and hold the USB adapter button for 10 seconds until

Cloud MIX 2 Quick Start Guide

Cloud MIX 2 Microphone Mute / Microphone Monitoring Button Mic mute toggle - Press the [ microphone mute ] button to turn the mic mute on/off. Mic monitoring toggle – Hold the [ microphone mute ] button for 2 seconds to toggle mic monitoring on/off.

Cloud Mix User Manual

Cloud MIX 2 Using the Multifunction Button Using the [ Multifunction ] button, the following media controls are available when using Bluetooth® or the Ultra-Low Latency USB dongle: Using the [ Multifunction ] button, the following phone controls are available when using Bluetooth®: Note: Button func

Please make sure the detachable headset cable is securely connected to the headset. To ensure the cable is properly connected, first disconnect the cable from the headset and then firmly reconnect the cable ensuring it is completely attached.