Mouse

Articles - Category Page

  • HyperX Pulsefire Raid Specifications

    Specifications Shape: Ergonomic Sensor: Pixart PMW3389 Resolution: Up to 16,000 DPI DPI presets: 800 / 1600 / 3200 DPI Speed: 450 IPS Acceleration: 50G Buttons: 11 Left / Right buttons switch: Omron Left / Right buttons durability: 20 million clicks Backlight: RGB (16,777,216 colors) Light effects:

    Knowledge Base Article

  • Is the HyperX Pulsefire Haste Wireless Mouse Water Resistant?

    The Puslefire Haste Wireless Mouse has an IP55 rating. It can withstand exposure to sweat, minor water accidents, dust, dirt, and oil.

    Knowledge Base Article

  • HyperX Pulsefire Haste 2 Pro Ngenuity Settings

    You can customize the following features for the Pulsefire Haste 2 Pro through Ngenuity: Lift Off Distance RGB lighting DPI Macros Polling Rate (2.4G/Wired Only) Button re-assignment

    Knowledge Base Article

  • HyperX Pulsefire Haste 2 Polling Rate

    Switch between 1000Hz (default) and 8000Hz polling rate. 1. Hold down the DPI Button. 2. While holding down the DPI button, Connect the mouse to a computer. 3. Continue holding the DPI button until either color (see table below) appears on the mouse wheel. 4. Release the DPI button. The LED will bli

    Knowledge Base Article

  • HyperX Pulsefire Haste 2 Installation

    Connect the mouse to a PC or game console containing a USB 2.0 (High-Speed) or higher port.

    Knowledge Base Article

  • HyperX Pulsefire Haste 2 Wireless Pairing Tool

    Pulsefire Haste 2 Wireless Pairing Tool

    Knowledge Base Article

  • HyperX Pulsefire Haste 2 Pro Onboard Configuration Profile

    The Pulsefire Haste 2 Pro has one onboard memory profile for storing a configuration from NGENUITY. Saved settings will remain in memory until either: Being overwritten within NGENUITY -> [Save to Mouse]. A factory reset is performed. On-board mouse settings will carry over onto any system the mouse

    Knowledge Base Article

  • HyperX Pulsefire Haste 2 Wireless Installation

    Charging It is recommended to fully charge your mouse before first use. The mouse is charged via USB-C, located at the top of the mouse. While plugged in, the mouse will operate in wired mode. 2.4G Wireless Mode 1. Switch the mouse to 2.4G power mode. 2. Connect the USB dongle to the USB adapter. 3.

    Knowledge Base Article

  • HyperX Pulsefire Haste Wireless Grip Tape Installation

    Pulsefire Haste Wireless includes grip tape that can be used for added control and comfort, if desired. The grip tape will cover the hex cutout holes on the left and right mouse buttons. 1. Attach the button grip tape for the left [1] and right [2] mouse buttons, with the pointed end facing the forw

    Knowledge Base Article

  • HyperX Pulsefire Haste 2 Wireless User Manual

    Pulsefire Haste 2 Wireless User Manual

    Knowledge Base Article