Cloud Alpha Family

Usage (Xbox One™) To use the headset with an Xbox One™, connect the 3.5mm plug on the headset directly to the 3.5mm jack on the Xbox™ One controller* If your Xbox One™ controller does not have a 3.5mm jack, you will need the Xbox One™ Stereo Headset adapter (sold separately) that plugs into the Xbox

빠른 시작 가이드

Cloud Alpha Wireless Specifications Headphone Driver: Dynamic, 50mm with neodymium magnets Form factor: Over ear, circumaural, closed back Frequency response: 15 Hz – 21 kHz Impedance: 62 Ω Sensitivity: 103 dBSPL/mW at 1 kHz T.H.D.: ≤ 2% Frame type: Aluminum Ear cushions: Memory foam and premium lea

마이크 음소거 버튼을 눌러 마이크 음소거를 켜거나 끄세요. LED 켜짐: 마이크 음소거됨 LED 꺼짐: 마이크 작동 중

Power on / off: Hold button for 2 seconds to power headset on / off. Battery level status: Press button to check the battery level. The status LED will automatically turn off to conserve battery life. Battery Level Headset Status LED 61% to 100% Solid-fade green 21% to 60% Solid-fade yellow 7% to 20

시스템에 헤드폰/마이크 통합 포트(일반적으로 노트북에 있음)가 있는 경우 3.5mm 잭을 PC에 직접 연결하십시오. 그렇지 않은 경우 PC 확장 포트의 암컷 단자에 연결한 다음 PC 확장 케이블의 수컷 단자를 시스템의 해당 포트에 연결하십시오.

Scroll up and down to adjust volume level.

Setting up with PlayStation 4 1. Connect the wireless USB adapter to the PlayStation 4 console. 2. Set Input Device to USB Headset (HyperX Cloud Alpha Wireless) 3. Set Output Device to USB Headset (HyperX Cloud Alpha Wireless) 4. Set Output to Headphones to All Audio 5. Set Volume Control (Headphone

볼륨 조절 휠을 돌려 볼륨을 높이거나 낮추세요. 경고: 헤드셋을 장시간 높은 볼륨으로 사용하면 영구적인 청력 손상이 발생할 수 있습니다.

It is recommended to fully charge your headset before first use. Charge Status Status LED Fully Charged Solid Green 61% - 99% Breathing Green 21% - 60% Breathing Yellow < 20% Breathing Red