Cloud Family

Connect the USB wireless dongle to your device. Set headset mode switch to the WiFi icon. Power on the headset. To ensure the headset is configured correctly on the PS5, follow the steps below: Go to the home page and select Settings > Sound. Under Microphone, set the following: Input Device: USB He

Mic Mute Button Press the button to turn the mic mute on/off • LED On: Mic muted • LED Off: Mic active Volume Wheel Scroll up or down to adjust the volume level. WARNING: Permanent hearing damage can occur if a headset is used at high volumes for extended periods.

HyperX Cloud III S Wireless User Manual

The Cloud Core Wireless DTS is not compatible with NGENUITY. Any software interaction with the headset will be done through DTS® Sound Unbound®. Please follow the instructions on the included DTS instruction card to enable DTS Headphone:X ®. Please note there is no code to enter for this product; th

Status LED ​

您可能只需要將耳機與 USB 轉接器重新配對即可。 ​ 請按照以下步驟將它們配對。 1. 在耳關機狀態下，按住電源按鈕，直到耳機狀態指示燈開始快速紅綠交替閃爍。此時耳機已進入配對模式。 2. 插入 USB 轉接器後，使用小工具（例如回形針、SIM 卡托彈出器等）按住 USB 轉接器針孔內的按鈕，直到轉接器上的 LED 指示燈快速閃爍。此時 USB 轉接器處於配對模式。 3. 將耳機靠近接收器。等待耳機指示燈和 USB 接收器指示燈都常亮。耳機和 USB 接收器現已配對成功。

Usage (Direct Connect) Connect your headset directly to your computer (or other devices) that have both a headset jack and a microphone jack. The headset jack, which has green stripes, plugs into the port signified by a green input or earphones symbol, and the microphone jack, which has pink stripes

Usage with Mobile Device (Phone or Tablet) To use the HyperX Cloud II headset with a mobile device, unplug the USB control box and plug the 3.5mm headset jack directly into the audio jack on your phone or tablet.

為耳機充電 建議首次使用前將耳機充滿電。 耳機充電時，耳機狀態指示燈會顯示目前的充電狀態。 有線充電 若要透過有線方式為耳機充電，請使用 USB 充電線將耳機插入 USB 連接埠。

Connect the USB wireless dongle to your device. Set headset mode switch to the WiFi icon. Power on the headset. To ensure the headset is configured correctly on the PC, follow the steps below. Right-click on the sound icon in the system tray and select Sound Settings. Set the output device to Speake