Cloud Family

1. Go to the home page and select Settings > Sound 2. Under Microphone, set the following: Input Device to USB Headset (HyperX Cloud Core Wireless) 3. Under Audio Output, set the following: Output Device: USB Headset (HyperX Cloud Core Wireless) Output to Headphones: All Audio 4. Under Volume, set H

Cloud II Core Wireless Mic mute/mic monitoring button Mic mute toggle - Press the button to turn the mic mute on/off Mic monitoring toggle - Hold the button for 3 seconds to toggle mic monitoring on/off

Cloud II 無線耳機規格 耳機 驅動單元：動圈式，53毫米，釹磁鐵 類型：全罩式，封閉式後背 頻率響應：15Hz–20kHz 阻抗：60 Ω 聲壓級：1kHz 時為 104dBSPL/mW；總諧波失真：≤ 1% 重量：300公克 含麥克風重量：309克 線材長度與種類：USB充電線（0.5公尺） 麥克風 元件：駐極體電容式麥克風 極性模式：雙向，降噪 頻率響應：50Hz-6.8kHz 靈敏度：-20dBV（1V/Pa，1kHz） 電池續航力* 30小時 無線範圍** 2.4 GHz 頻率，最遠可達 20 米 *測試時耳機音量設定為50%。電池續航時間因使用情況而異。 **無線傳輸範圍可能

Cloud Usage (Correct vs Incorrect) When connecting your HyperX Cloud headset to a device that has a single 3.5mm audio jack, you MUST use the splitter cable (or “Y” cable) to ensure that each jack is connected properly and securely plugged in. Do NOT ignore or leave any audio jacks unplugged as depi

While the headset is powered off and in adapter mode, hold down the power button until the headset status LED starts blinking white rapidly. The headset is now in pairing mode. While the USB wireless dongle is plugged in, use a small tool (e.g. paper clip, SIM tray ejector, etc.) to hold down the bu

Mic mute / Mic monitoring button Mic mute toggle - Press the button to turn the mic mute on/off Mic monitoring toggle – Hold the button for 3 seconds to toggle mic monitoring on/off

Usage (Direct Connect) with No Control Box Connect your headset directly to your computer, game console, or another device (phone or tablet) that has a 3.5mm audio jack.

Cloud II User Manual

Cloud Mini Wireless Bluetooth Setup and Usage Bluetooth Pairing With the headset turned ON, press and hold the Bluetooth multifunction button for 2 seconds. The LED indicator will flash blue. On your Bluetooth-enabled device, search and connect to HyperX Cloud Mini. Once connected, the indicator LED

Usage (with Control Box) Connect the headset’s 3.5mm audio jack to the input jack on the USB control box. The USB control box then connects to a computer using the USB connector on the end of the control box. To ensure that HyperX Cloud II is the default audio device, you must follow these instructi