鍵盤

HyperX Alloy Rise 75 無線耳機使用手冊

Ducky One 2 Mini RGB Backlight Modes All above modes can be adjusted with the following key sequence: Fn + Alt + J：Decrease speed Fn + Alt + L：Increase speed Hold Fn + Alt + T for 3 seconds to turn o all backlit (including CM1 and CM2) ​ Only the backlit modes can be adjusted using the following: Fn

Ducky One 2 Mini Multimedia Functions

Ducky One 2 Mini Debounce Time Setting ​ Note: The method is to adjust the debounce time of the metal shrapnel in the mechanical shaft during the pressing process. The shorter the time, the sooner it can be triggered, but if the time is too short may cause misjudgment. If it’s not necessary to chang

Note: all custom LED profiles will be lost!

Ducky Mini Macro Step 1. Profile selections ​​ Note: When the keyboard is plugged in, Caps Lock and Number Keys will blink based on the selected profile number. Adjust profile to 2~6 in order to set Macro. After the profile is switched, the Caps Lock or Indicator light will blink based on the curren

Yes. The USB port on the back of this keyboard is a fully functional USB 2.0 port. It can be used for charging as well as data transfer or a mouse. One of the connectors on the keyboard cable (black) is for the USB port on the keyboard and the other (white) is for the keyboard itself.

​​ Keyboard Switch: HyperX Switch Type: Mechanical Backlight: RGB (16,777,216 colors) Light effects: Per key RGB lighting** and 5 brightness levels Onboard memory: 3 profiles Connection type: USB Type-C to USB Type-A Anti-ghosting: 100% anti-ghosting Key rollover: N-key mode LED indicator: Yes Media

Demo Mode Hold Left Ctrl + Left Shift + Caps Lock then plug the keyboard into a power source. Note: It is suitable for plugging in the mobile power supply or USB charging stand to provide a lighting effects display, and the keyboard won't send any signal. Please note that it is limited to power supp

If you are experiencing any issues with the keyboard, you can perform a factory reset. However, this will cause you to lose the custom LED profile. Press and hold FN + ESC keys for 3 seconds until the keyboard backlight blinks.