鍵盤

​​ ​​ LED背光模式： 共有六種 LED 背光模式：恆亮 ► 呼吸燈 ► 觸發燈 ► 爆炸燈 ► 波狀燈 ► 自訂燈。 常亮：持續照明（預設）。 呼吸：緩慢眨眼，模仿呼吸。 觸發：按下按鍵時，單一按鍵會亮起，一秒鐘後慢慢熄滅。 爆炸：按下按鍵時，單一按鍵會發出閃電效果。 波浪：按鍵將以波浪狀從左到右依序亮起。 自訂：您可以選擇要點亮的按鍵。請依照以下步驟進行自訂： 將背光模式切換為自訂。 按住 FN + 右 CTRL 鍵，直到背光燈熄滅。 按下您想要開啟背光的按鍵。 完成後，再次按下 FN + 右 CTRL 鍵儲存自訂背光設定檔。 ​

Recording macros is currently not supported on the Alloy Mars 2. There are three pre-programmed lighting profiles and 14 built-in lighting effects, each accessible by using hot-key combinations. To switch the programmed lighting profile, press Fn + (F1, F2, or F3). To change the lighting effect, pre

LED backlight modes: There are six LED backlight modes: ► Solid (default) ► Breathing ► Trigger ► Explosion ► Wave ► Custom. Solid: Constant lightning (default setting). Breathing: Slow rhythmic blinking that mimics breathing. Trigger: Individuals keys will light up when pressed and slowly fade afte

HyperX Alloy MWK100 User Manual

RGB LED Zone Customization Modes ​​ Recording steps: Adjust to the color first, then set the individual keys to be set to that color. Press Fn + Alt + Caps Lock for 3 seconds, the buttons G (CM1) and B (CM2) will illuminate then press G to set CM1 and press B to set CM2. When starting recording mode

Alloy FPS RGB 概述 A. 板載記憶體設定檔選擇 B. 媒體控制鍵 C. 音量控制鍵 D. 遊戲模式鍵 E. 遊戲模式/數字鎖定/大寫鎖定指示燈 F. LED亮度控制鍵 G. 背面 USB 連接埠 - 手機 USB 充電埠 H. 背面迷你 USB 連接埠 - 鍵盤 USB 連接埠

Alloy Origins 60 Function Keys Press “FN” and a function key at the same time to activate its secondary feature as indicated on the keycap side-print.

Alloy Elite 2 Overview A. Brightness control button B. Profle selection button C. Game Mode button' D. Back USB port (USB 2.0 pass-through) E. Media control buttons F. Volume mute button G. Volume control wheel H. Caps Lock / Num Lock / Game Mode indicators

將迷你USB接口連接到鍵盤。將兩個USB介面都連接到電腦。

HyperX Alloy Rise 75 使用手冊