Cloud II Series

Setting up with PlayStation 5 1. Connect the wireless USB adapter to the PlayStation 5 console. 2. Go to the home page and select Settings > Sound 3. Under Microphone, set the following: Input Device to USB Headset (HyperX Cloud II Wireless) 4. Under Audio Output, set the following: Output Device: U

Usage with Mobile Device (Phone or Tablet) To use the HyperX Cloud II headset with a mobile device, unplug the USB control box and plug the 3.5mm headset jack directly into the audio jack on your phone or tablet.

Cloud II Wireless User Manual

Cloud II User Manual

Cloud II Core Wireless Quick Start Guide

Cloud II Core Wireless Setting up with PlayStation 5 1. Connect the wireless dongle to your device. 2. Power on the headset 3. Go to the home page and select Settings > Sound 4. Microphone: Input Device: USB Headset "HyperX Cloud II Core Wireless" 5. Audio Output: Output Device: USB Headset "HyperX

Cloud II Wireless Controls Status LED Power / 7.1 Surround Sound button Hold for 3 seconds to power the headset on/off Press to toggle 7.1 Surround Sound* on/off *Virtual 7.1 surround sound outputs as a 2 channel stereo signal to be used with stereo headphones. Mic mute / mic monitoring button Press

Technical Specifications ​ Headset • Transducer type: Dynamic 53mm with Neodynium Magnets • Operating principle: Closed • Frequency response: 15Hz-25KHz (earphones) • Nominal impedance: 60 ohm per system • Nominal SPL: 98+/-3dB • T.H.D: < 2% • Power handling capacity: 150mW • Sound coupling to the e

Headphone Driver: Dynamic, 53mm with neodymium magnets Type: Circumaural, Closed back Frequency response: 15Hz–20kHz Impedance: 60 Ω Sound pressure level: 104dBSPL/mW at 1kHz T.H.D.: ≤ 1% Weight: 300g Weight with mic: 309g Cable length and type: USB charge cable (0.5m) Microphone Element: Electret c

Usage (Direct Connect) with No Control Box Connect your headset directly to your computer, game console, or another device (phone or tablet) that has a 3.5mm audio jack.