Cloud II Series

Cloud II Wireless LED indicator ​

Cloud II Core Wireless Quick Start Guide (HP OMEN)

Manually Pairing the Headset and USB Adapter The headset and USB adapter are automatically paired together out of the box. But if the manual pairing is needed, follow the steps below to pair the headset and USB adapter. 1. While the headset is powered off, hold down the power button until the headse

Wireless Dongle Method 1. While the headset is off, hold the power button until the headset status LED starts blinking red/green rapidly. 2. While the wireless dongle is plugged in, use a small tool to hold down the pairing button inside the pin hole until the dongle LED starts blinking rapidly. The

Cloud II Wireless Firmware Update 4100 Download Firmware If your headset seems to stop working after the update, you may need to re-pair the headset to the USB dongle.

(HP OMEN) Cloud II Core Wireless User Manual

*Supported only on compatible HP OMEN systems and a compatible Cloud II Core Wireless version. Pairing to HP OMEN System 1. In Ngenuity Software, navigate to the "Settings" page 2. Under "HyperX Internal Wireless Audio Adapter" device, click on "Initiate Pairing Mode" 3. Follow the On-Screen Instruc

Usage (Xbox® One) To use the HyperX Cloud II headset with Xbox® One, you will need the Xbox One adapter (sold separately) that plugs into the Xbox® One controller (pictured below.) Because this adapter has built-in volume controls, you will remove the USB control box (that came with your HyperX Clou

Cloud II Wireless DTS LED indicator ​ Charging headsets

Cloud II Wireless Headset Specifications Headphone Driver: Dynamic, 53mm with neodymium magnets Type: Circumaural, Closed back Frequency response: 15Hz–20kHz Impedance: 60 Ω Sound pressure level: 104dBSPL/mW at 1kHz T.H.D.: ≤ 1% Weight: 300g Weight with mic: 309g Cable length and type: USB charge ca