Centrum pomocy HyperX
Artykuły z bazy wiedzy
Artykuły z bazy wiedzy
Mic Mute Button Press the button to turn the mic mute on/off • LED On: Mic muted • LED Off: Mic active Volume Wheel Scroll up or down to adjust the volume level. WARNING: Permanent hearing damage can occur if a headset is used at high volumes for extended periods.
Artykuł w bazie wiedzy
•
Cloud III
HyperX Cloud III S Wireless User Manual
Artykuł w bazie wiedzy
•
Cloud III S Wireless
Connect the USB wireless dongle to your device. Set headset mode switch to the WiFi icon. Power on the headset. To ensure the headset is configured correctly on the PC, follow the steps below. Right-click on the sound icon in the system tray and select Sound Settings. Set the output device to Speake
Artykuł w bazie wiedzy
•
Cloud III S Wireless
Instant Pair should be possible as long as the OMEN laptop is “Connection Ready” in NGENUITY settings and the headset has not been previously paired with another OMEN laptop. If either the OMEN laptop or the headset has been paired already, both the laptop and the headset need the Instant Pair pairi
Artykuł w bazie wiedzy
•
Cloud III S Wireless
Power off the headset. Carefully pull the right ear cushion from the headset. Unscrew the 4x Phillips screws to separate the driver cover from the right earcup. Gently separate the cover from the earcup to avoid any damage. Locate and remove the battery secured with the connector. Place new battery
Artykuł w bazie wiedzy
•
Cloud III S Wireless
In NGENUITY software, nagivate to the Settings tab. Under "Connected Hardware", find "HyperX Internal Wireless Audio Adapter" and click on "Initiate Pairing Mode". Click on the "Start Pairing" button. The laptop is now in pairing mode. While the headset is powered off, hold down the power button unt
Artykuł w bazie wiedzy
•
Cloud III Wireless
Double press the power button to switch between OMEN gaming laptop connection and USB wireless dongle connection.
Artykuł w bazie wiedzy
•
Cloud III S Wireless
Setting up with PC Right-click the speaker icon > Select Open Sound settings > Select Sound control panel. Playback Device Set Default Device to "HyperX Cloud III" Recording Device Set Default Device to "HyperX Cloud III"
Artykuł w bazie wiedzy
•
Cloud III
Please note that no Cloud III wired settings configured within NGENUITY are saved onto the headset (USB). They will not persist when used with another system.
Artykuł w bazie wiedzy
•
Cloud III