Headset

Articles - Category Page

  • Connecting the HyperX CloudX Stinger 3 Xbox to the console

    Plug the headset into the controller using the 3.5mm jack

    Knowledge Base Article

  • Charging the HyperX Cloud Stinger 3 Wireless Headset

    Connect the headset using the USB cable. It is recommended to fully charge the headset before first use* Fully Charged - Solid Green 61%-99% - Breathing Green 21%-60% - Breathing Yellow

    Knowledge Base Article

  • HyperX Cloud Stinger 3 Wireless Swivel to Mute Microphone

    Microphone down position - Microphone On Microphone up position - Microphone Off

    Knowledge Base Article

  • Cloud Alpha Air - Usage via 3.5mm

    Plug the 3.5mm jack into the system (PC, controller).

    Knowledge Base Article

  • Cloud Core Quick Start Guide

    Cloud Core Quick Start Guide

    Knowledge Base Article

  • HyperX Cloud Stinger Wireless Specifications

    Cloud Stinger Wireless Specifications Headphone Driver: Dynamic, 50mm with neodymium magnets Type: Circumaural, Closed back Frequency response: 20Hz-20,000Hz Impedance: 32 Ohm Sound pressure level: 109dBSPL/mW at 1kHz T.H.D.: < 2% Weight: 270g Cable length and type: USB charging cable (1m) Microphon

    Knowledge Base Article

  • HyperX CloudX Stinger 3 Wireless Xbox Overview

    A. Swivel-To-Mute Microphone B. Status LED C. Power Button D. USB-C Charge Port E. Multifunciton Button F. Volume Wheel / Headset Chat Mix G. Wireless Mode Switch H. USB Wireless Dongle I. USB Dongle Mode Switch J. Dongle Status LED K. Pairing Pin Hole L. USB-C to USB-A Adapter M. USB-C Charge Cable

    Knowledge Base Article

  • What is the range of the wireless signal for the Cloud Flight?

    20 meters (65 feet) is the effective wireless range in optimal conditions. Environmental conditions such as obstacles, interference from other wireless signals, etc., will reduce the effective range

    Knowledge Base Article

  • Cloud Flight S Setting up with Discord

    Setting up with Discord 1. In Discord settings, select Voice & Video. 2. Under Voice Settings, set Input Device to “Microphone (HyperX Cloud Flight S Chat)”. 3. Set Output Device to “Headset Earphone (HyperX Cloud Flight S Chat)”.

    Knowledge Base Article

  • Cloud Orbit S USB Audio Modes

    USB Audio Modes While the headset is connected to a device via USB, hold down the microphone volume wheel for 2 seconds to change the USB audio mode. A voice prompt will tell you which mode the headset is using. Audio Mode 7.1 Channel The default mode that’s best used for immersive surround sound co

    Knowledge Base Article