Cloud Orbit Family

Articles - Category Page

  • Cloud Orbit S User Manual

    Cloud Orbit S User Manual

    Knowledge Base Article

  • Cloud Orbit S Software User Manual

    Cloud Orbit S Software User Manual

    Knowledge Base Article

  • Cloud Orbit S PC USB Setup

    PC USB Setup 1. Power on the headset. 2. Connect the headset to the PC with the USB Type-C to USB Type-A cable. 3. Right click speaker icon > Select Open Sound settings > Select Sound control panel 4. Under Playback tab, click on “HyperX Cloud Orbit S” and click on Set Default. 5. Under Recording ta

    Knowledge Base Article

  • Cloud Orbit S headset USB battery charging

    There are several reasons the Orbit S headset battery might not be charging while connected with the USB cable: The USB port the headset is plugged into may not be supplying enough power. This may happen if you are using a USB hub or laptop USB port Some USB ports do not supply power when in a power

    Knowledge Base Article

  • Cloud Orbit S Specifications

    Cloud Orbit S Specifications Headphone Driver: Planar transducer, 100 mm Type: Circumaural, Closed back Frequency response: 10Hz–50,000Hz Sound pressure level: >120 dB T.H.D.: < 0.1% (1 kHz, 1 mW) Weight: 368g Modes Orbit: 3D audio Orbit S: 3D audio with head tracking Cable length USB Type-C to USB

    Knowledge Base Article

  • Cloud Orbit S Nintendo Switch USB Setup

    Nintendo Switch USB Setup 1. Power on the headset. 2. Hold down the microphone volume wheel for 2 seconds to change audio modes. Repeat this step until the headset plays the voice prompt “2 Channel”. 3. Connect the headset to the Nintendo Switch dock via the USB Type-C to Type-A cable. 4. Hold the H

    Knowledge Base Article

  • Cloud Orbit EQ Presets

    EQ Presets Short press and scroll the microphone volume wheel up or down to change the EQ preset. A voice prompt will tell you which EQ preset the headset is using. Default - Tuned to the Audeze House curve. Foot Steps - Enhances sounds of footsteps. Ballistics - Enhances gunshots and other ballisti

    Knowledge Base Article

  • Cloud Orbit Charging the Headset

    Charging the Headset When the charging cable is connected the LED will indicate the status. Status LED LED solid red > Charging LED off > Fully charged “Battery low” voice prompt plays at 15% battery. To disable USB charging, hold down the headphone volume wheel for 2 seconds.

    Knowledge Base Article

  • Cloud Orbit Software User Manual

    Cloud Orbit Software User Manual

    Knowledge Base Article

  • Cloud Orbit Overview

    A. Microphone mute B. Status LED C. Power button D. 3D button E. Microphone port F. USB Type-C port G. 3.5mm port H. Microphone volume wheel I. Headphone volume wheel J. Detachable boom microphone K. USB Type-C to USB Type-A cable L. USB Type-C to USB Type-C cab M. 3.5mm cable (4 pole)

    Knowledge Base Article